Date:         Fri, 05 Jan 1996 15:56:00 -0800 (PST)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Maher, Steve (SD-MS)" <SMAHER@PO2.GI.COM>
Subject:      RE: valve adjustment + what else


1) as far as glue for the gaskets, i've heard use silicone based glue
or whell bearing grease.  anyone have an opinion.

Personally I use just a little bit of Blue Permatex, on the "cover" side
of the gasket only. This is the kind of application it's designed for.

Steve Maher   smaher@gi.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.