In a message dated 96-02-01 02:30:25 EST, jonww@ix.netcom.com (Jon Walton) writes: >After 170,000 miles it is now time to replace the liquid puncher. I >have been quoted about $2350 for a factory 1.9 longblock. It seems that >installation can run up to $1200. This seems sort of high for the >installation labor. (of course this is dealer labor rates.) What is a >reasonable cost for replacement?? Question #2:Can a 2.1 be substituted, >or were there too many changes in '86. Thanks for any input. I would stronly recomend a 2.1. If buying a long block, it is a direct fit and your FI will support it. I've done this many times. I would look to find a good used one complete with the exhaust. The cooling system in the Van can be upgraded to the later style if you have all the pieces. The later system works better due to some flow improvements. Less susceptible to air in the syetm, easier to bleed. E-mail me if you need any frther info. I can also help you get an engine.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.