A number of people have asked "what is a LEAK DOWN test" and can i do it myself. First, let me explain the concept. We already use a compression test to determine an engines condiditon. the problem with this test is that there are too many variables. It can only be used to check engine condition by comparing cylinders to each other or a past norm. Variables such as cam profile, engine cranking speed etc, will affect the readings. A leak down tester uses air from a compressor and measures the rate at which it leaks through the engine. This is done with the engine not running and the beauty of this is that toy can find the source of the leakage by listening for the escaped air. Internal leakge is found by air bubbles in the cooling system. Tools need are a leakdown tester, and an air compressor. The tester is available from Milton at about $60.00. Compressor should be at least 2hp and deliver 90psi. Procedure: Remove spark plugs. Set engine to TDC #1. Calibrate test gauge per the instructions. Lock engine so it can not turn. Conect hose to spark plug hole, Conect pressurized gauge to hose connection. Read leakage. If looking for coolant leaks and nothing obvious shows up, bypass gauge and connect shop air direct to cylinder. Open radiator cap before this. If coolant sprays out, you have a head problem. Do same test on rest of cylinders. Remember to set TDC of each piston for compression stroke. This test is also great for air cooled haed leaks and valve problems. Note that all engines will have some leakge past the rings. I always do full pressure test when I suspect a problem. Make sure engine is secured with full pressure test. it will spin violently. With gauge connected, you can rock crankshaft to see if leakage changes. If so, this is a sign that the ring lands are wearing, new engines will also do this until the rings are seated. I know these instructions are kinda flaky, but I hope this gives some insight as to this type of test. If having a mechanic work on your vehicle, he should be familiar with the leakdown test. I would be concerned if he doesn,t. This is a basic troubleshooting tool that all fleets use. Especially on diesels. Dennis.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.