(scratching my head) hmm, yeah, now that you mention it, i think i remember that o-ring...it's almost flush mounted, right? what i though was the problem was that there were only two bolt holding the thing together, and the plastic wasn't stiff enough to hold the surfaces together in the middle (furthest away from the bolts)...if the thing had three or four equi-distant bolts, then the seal would have been much more secure (yeah, yeah...if it had 28 bolts, then it would be REAL secure) it doesn't leak now because i took the heater out of the loop...got a shunt in place of the heater...
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.