In a message dated 96-03-17 09:20:55 EST, PLICKYS@aol.com writes: >I recently started having a vibration problem with my 87' Syncro. The >vibration is very pronounced within the van but i cant hear much from >outside. I think i have a problem with either a transmission of engine >mount. Yesterday i jacked up the front of the transmission (slightly) and >the vibration ceased. The two mounts appear to be in good condition but i >think thats my problem. Anyway, how tough is it to replace these mounts in >the Syncro, and has anyone had a similiar problem?? I'm going to look into >it more today. Bently is pretty vague concerning these mounts in the syncro. > > Your vibration is probably related to the driveshaft. Have you checked the universal joints at each end? There should be no play. Reapiring these shafts is an iffy thing at best. they seem to have all sorts of balance problems after repair. You will either need a very good drive shaft shop or plan on buying new shaft from dealer. Dennis.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.