paul, i just did this task last saturday. it is not hard, although the bently manual makes it look that way. basically, you need to remove the steering wheel. after that, getup underneath the plastic cover and remove the 2 philips screw's that hold the cover down. Now get yourself a easy-out and take out the shear bolt that holds the ignition on the collumn. mine cane out with out much trouble. now you can lift the unit off. i did not have to disconnect the water lines when i did mine. i have yet to put it back together, but imagin that it will not be too bad. hope this helps. take care and God Bless matt
On Tue, 26 Mar 1996 PWIES@loyola.edu wrote: > Hey folks, > Anyone have first hand knowledge on the removal of the ignition switch > on a 75-79 bus?? From looking at the Haynes manual, this looks like an > awful project. > > thanks, > Paul >
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.