Lurking, listening, sometimes questioning, the consensus SEEMS to be 1. Try BarsLeaks first. If that doesn't work, 2. Try a very good cleaning plus epoxy and new gaskets ($250+). If that doesn't work, 3. Try adding metal (TIG weld) and remachining down. ($?) If that doesn't work, 4. Bite the bullet, get new heads and gaskets (~1000.) Would you folks say this is accurate? Waiting for the Weather to Warm so I can Whale & Wail on my 'Wagen, ====>James Glenn
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.