Thanks to all of you helping me thru my Syncro fix on the new wiper contact. My question is - the wiper has two contacts on that funky circuit board deal. Are the two contacts for the same signal i.e. - are there two in case one goes bad. The reason for the quesiton - when i carefully bent the arm on the wiper to develope new contact - I did it ever so slightly. I would like to bend it even more to have a nice clean contact surface. Also, those of you who have done this fix - how long did it work for?? Seems like it should work for another 100,000. Or maybe until the transmission goes bad and I light the whole thing on fire.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.