to take the frame apart, first the window must be taken off the bus. Unscrew the window latch and pull off the weather strip on the body of the bus. This will expose 5 small inset screws that must be removed. This is usually a real pain. Be careful not to mess up the screw heads or it'll be really bad. I like to use the screwdriver (reversable) that came in the original tool kit. once the window is out, remove the weatherstrip on the outside of the frame. This will expose two pairs of two screws of the same type that held the frame to the bus. Care fully remove them and pull the two halves of the frame apart. :) easy as pie
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.