In a message dated 96-03-08 19:20:15 EST, you write: >Drove the new baby to work today - first time in some traffic - and >noticed some lurching in 2nd & 3rd gear at around 2500-3000 rpm. ie: >trying maintain a steady speed in slow traffic would result in a >surging or lurching motion. Accelerate to a little over 3000 & it >would mostly go away. >It seems to be related to part throttle power delivery - ie: 3/4 or >more accel to 4000 in each gear is smooth, but a "lazy" foot with 1/2 >throttle or so causes a similar lurching during accel. > > Check the throttle valve switch. It can be adjusted as discribed in Bently. I had a similiar problem with my 87' syncro. My switch was shot and needed to be replaced. This solved the problem. It's worth a look. Mike
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.