Date:         Thu, 21 Mar 1996 11:31:19 EDT
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Edward Claiborne Gould" <CLAIBORN@cw-f1.umd.umich.edu>
Subject:      questions on temp gauges

I have a '72 with the standard T4 1700 engine.  I was wondering first 
of all, where is the predrilled mounting spot on the heads for a temp 
sensor?  When i got the bus it had a non functioning cyl head temp 
gauge.  It turns out that the power and everything is hooked up to it 
and if i ground out this one haging wire it pegs the needle.  There 
may just be a sensor back there some where.  Aside from that, I was 
wondering how much setups for  cyl head temp
                               oil temp  and 
                               oil pressure
                                              would cost and the best 
way/place to install that pressure sensor.
Thanks.
Ed.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.