Date:         Tue, 5 Mar 1996 22:24:43 -0500
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Claralw@aol.com
Subject:      Re: 65 pop-out window disassembly

to take the frame apart, first the window must be taken off the bus.  Unscrew
the window latch and pull off the weather strip on the body of the bus.  This
will expose 5 small inset screws that must be removed.  This is usually a
real pain.   Be careful not  to mess up the screw heads or it'll be really
bad.  I like to use the screwdriver (reversable) that came in the original
tool kit.  

once the window is out, remove the weatherstrip on the outside of the frame.
 This will expose two pairs of two screws of the same type that held the
frame to the bus.   Care fully remove them and pull the two halves of the
frame apart.  

:)    easy as pie

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.