Hi all. I have finally gotten new plugs and a cap, rotor , coil and wires into Seigfried. The reasons are long and not needed now. Anyway, he sat for about a month while this took place. Now, I still have a hard start/crummy running problem, but I am pretty sure that is the throttle area that needs to be cleaned as per some previous posts. But the blasted oil light comes on above 3000 rpm. It did not before. I put on a Mann filter(for real vanagons) and that did not do it. Any thoughts as to why it was fine, then sat, now the blasted (this is a family list) now comes on!! am losing my remaining hair. TIA Mike Elkavitch
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.