I'm putting the fuel injection back into my 77, and I'm scoping out how much fuel line (and clamps) I'll need. I wanted to check with the experts that I've got the right fuel 'circuit' ; that is, I've got all the connections in the correct order. I only have a Bentley manual to go by, and it isn't too clear as to the complete fuel flow connections. I was hoping someone could look at what I've deduced the circuit to be, so I can start ripping stuff out and putting stuff in. FROM TO ---- -- tank filter filter T (i have a gas heater) T fuel pump pump Left fuel 'ring' left ring #3 injector left ring #4 injector left ring cold start injector cold start right ring right ring #2 injector right ring #1 injector right ring pressure regulator pressure reg tank Does this look right? I figure I'll need about 12 feet (conservatively??) of hose, and 24 hose clamps. Thanks in advance.
Dave.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.