Hi, I'm new to the list so I don't know if this has been discussed before. I have a '71 camper with power assist brakes. I have good solid pedal feel with no fade, but it takes a lot of force to haul this baby down! I though the front or rear circuit was leaking but front and back wheels bind when I raise the car and have someone push on the brake pedal. I suspect it might be the assist diagphragm (or whatever you call it) on the master cylinder. Does anyone know how to diagnose a failure of this unit, or have any other suggestions. Chris
:==================================: : Christof Hurschler : : UW Orthopedic Research Labs : : Phone: 608-263-1343 : : hurschle@ortho.surgery.wisc.edu : :==================================:
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.