Date:         Fri, 26 Apr 1996 09:00:34 -0700
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         drewj@ihs.issaquah.wednet.edu (Drew, Jody           IHS-STAFF)
Subject:      Re: Oil Press. Sender location

Brian Miller worries that the T shape of the oil pressure sending sensor will 
be a problem what with the pendulum effect of engine vibrations, etc.  The PO 
of my '68 Bus installed what sounds like this same contraption over 12 years 
ago ( I bought in 1984 ).  I have had NO LEAKS or any other problems 
associated with leaks or thread damage to the hole.  I do now have a 
flickering oil light problem, but I think its due to the brittleness of the 
plastic covering the wire and that it seems to be a bit cracked.
Good Luck 
Jody
'68 Bus Stella 

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.