>drain the oil completely and then refill the tranny with new oil. My >manual says to use SAE 90 hypoid oil. First of all, is this something I Yes, and do the reduction boxes, too. YOu'll need the 17mm hex tool to get the filler and drain plugs off. Remove the filler plug first, so you know that you can. I'm using 85/140 in my bus. Thom Fitzpatrick thom@calweb.com - http://www.calweb.com/~thom Keeper of the Barndoor Bus Web Page: http://www.calweb.com/~thom/barndoor.html
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.