You all remember the story of the "free" Vanagon from South Carolina. I just went on vacation in it. I had a situation before I left that I dubbed Vanagon farts. I got lots of info from everyone. The one that seemed to fix the problem was the airflow meter, which I had thought I fixed before I left. While on vacation, I had more problems. I was a long way from home. I figured the airflow meter was gone again after my rigging of the thing. Bought a used one from a guy for $200. Seemed like a deal. He even put it in for me. Seems to work well after that, but as soon as the engine warmed up again, it got worse. He told me about a guy that could set the airflow meter for me. I went to see him. He decided the airflow meter was set correctly. He determined it was the distributor. The shaft had side to side play. This was causing the points to bang together instead of just closing. He adjusted the points open more and re set my timing to make up for it. It ran great after that. I went back to the guy I bought the airflow meter from and got another distributor from him for $100. I thought that was a little high, but what do I know. I figured if I had one, I wouldn't need it. Things went pretty well after that, but now I needed brakes. I went to a Firestone dealer. They determined I needed everything. I needed front calipers, rotors, rear cylinders, shoes, and a new master cylinder. They could get their hands on everything but the master cylinder and the front calipers. Cost me $675 for this operation. This was supposed to be a cheap vacation. I was sleeping in the back of the van to save on motel/hotel costs. The problem started again. I had the spare distributor so I changed it (in the rain!). The problem remained. I decided to cut my trip short and try to baby the thing home. I could drive all day as long as I didn't take it over 50 or 55 mph. Seemed to be an rpm thing instead of a throttle thing. Got home and took it over to the local VW guru. He pointed right to the problem. It seems there's a thing called a cylinder head temp sender. If the head temp gets too hot, the engine cuts off. That was the problem all the time. The thing was loose. Actually, it's not loose, It's stripped. On the head of course, not the sending unit. The thing vibrates out and the engine cuts out. I asked the guru what my options are and he said I didn't have any. I needed a new head. So this is the story of the "free" vanagon. So far since my friend gave it to me, I've spend over $4000 on it. So much for free. So, before I go outside and torch it, anyone have any "cheap" ideas that will work? Jim Kirk captain@iquest.net
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.