One (heavy wire) goes to the main battery terminal. One (heavy wire) goes to the auxiliary. One goes to ground. The switching signal (smaller wire) is usually wired to the alternator warning light. If you don't have a service manual with camper wiring diagram, you can borrow mine (I'm across the parking lot :) + Morris Arthur morris_arthur@unc.edu + Center for Multiphase Research http://cmr.sph.unc.edu/CMR + Environmental Sciences and Engineering, UNC http://www.sph.unc.edu/envr
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.