In a message dated 96-05-03 01:21:35 EDT, vwbus@tcpbbs.com writes: >J-tubes and a merged header system with a bung welded right after the >merge threaded for O2 sensor, and a standard bug single side quiet >muffler >might be a great solution? Could get the bigger tube performance bug >stuff to match ports better. Anyone want to touch this, I am >admittedly WAY >out here. But with the extracto pipe and muffler and J tubes totaling >about >$100 for reasonable quality stuff, and hell you can get the O2 sensor >bung >ready to weld on from anyone selling the Haltech O2 sensor add on kits >for >maybe $10, pay somebody $10 to weld it on, and you got the whole system >for about 1 tube cost (whoops, minus the converter, but one might work >it >in as well). Two flanges on the WB in th wrong direction for the J pipes to fit. DANSK pipes are not as heavy,(flanges and pipes) as OEM. Don't fitt as well and even more prone to crack at the flanges, but they do work. Dennis
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.