>My '69 bus had hex socket-head bolts holding its CVs on. When I replaced >one, couldn't get them loose, so clamped my vice grips on the end of the >cheapo allen wrench I was using. SNAP. Ack. Put the vise-grips on the bolt head, people, not the tool. Then try to apply exactly the same torque to both the vise-grips and the tool simultaneously. They'll come right out. If I'm not the one who put the bolt in, I now do this as a matter of course, otherwise 50/50 the thing is gonna strip even with the right tool.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.