Oops- Jim Davis points out a flaw- what I *meant* to say was >So I measure 1.64 feet on my breaker bar and make a mark on the bar and >stand with one foot on each side of the line on the bar, and equalize >my wieght. The point is to apply 238 lb, 1.64 feet down the breaker bar. That means the CENTER of the place the wieght is applied has to be 1.64 feet from the center of the socket drive. Bill
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.