On Tue, 14 May 1996, Mike White wrote: > What I went through only two months ago, my friend Rich is going > through today. (A '64 Kombi) > > Seems all the bolts but ONE fell out of the driver side reduction > box/swingarm assembly. I got under there last night to install a > couple new bolts, and noticed one bolt was sheared off. ACK. (snip) I had similiar experiences. My solution was to disassemble it down to the swing tube, take it to a machine shop and have them put thread inserts into the soft metal inner casing of the reduction boxes. It is a good idea not to use any 'screwed' up bolts when you put it all back together. 8-) Good luck. Jon Christensen /V\ Membership Coordinator for the ~Certified VW Nut \W/ Vintage VW Club of America vvwca@primenet.com Co-Editor of the VVWCA Newsletter http://www.sky.net/~rmk/vvwca/ KC Kombis' NEATO Co-Rep
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.