Walker and Bosal make Cats that fit. The Walker is part #15612. It fits pefectly and has the hole in the correct place for the O2 Sensor. The element is slightly smaller than factory but the flanges are a perfect fit. The inlet will accept either the donut or gasket depending on your inlet pipe. This cat can be used for all Vanagons including air cooled by merely pluging the O2 sensor hole. Cost should be about $150.00. The Bosal is part #099-922. Flanges are more universal with inlet being a swivel. This cat is a pancke (oval) design that and the bolt holes are big requiring 10 mm bolts or washers. Includes O2 sensor plug for use on earlier vehicles that have sensor in pipe. This one costs about $140.00 Hope this helps all, Dennis H.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.