In a message dated 96-05-08 09:33:11 EDT, DBRADSHAW@mscc.cc.tn.us writes: >) > >This may be nit-picking, but just trying to CMA! > >For my 85, in doing the heads, I forgot to note where the following ground >wires were attached. Can someone help? > >There are 3 together in a bundle--I think these go together on the top of the >head. > >Another 1 comes from the connector mounted to the water pump assembly. > >Another 1 is connected to the distributor cover. > >Also, there is a 1/2" flat braided strap, about a foot long, grounded to the >body under the ignition coil. > > > >If anyone can tell me where these go, thanks-- I'm about ready to turn the >key >(after 6 months!) There are two 6mm bolt holes in the top of the head on the right side Split the wires and bolt there. Ground strap goes from there to the bdy by the ignition coil. Dennis
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.