Date:         Tue, 14 May 1996 16:28:34 MST
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         "Mike White" <MIKE.WHITE@law.utah.edu>
Subject:      Re: Splittie Reduction Box Trauma

> I had similiar experiences.  My solution was to disassemble it down to 
> the swing tube, take it to a machine shop and have them put thread 
> inserts into the soft metal inner casing of the reduction boxes.  It is a 
> good idea not to use any 'screwed' up bolts when you put it all back 
> together.  8-)    Good luck.

Yuck.  Well I'll tell ya, don't go looking for a 13mm tap!  Just not 
a common object.  Finally found a place that will special order one 
for me.  $25 for a one time deal is pretty steep.  (At least it isn't 
my money! =-P)  Is a 13mm the answer to my problem?  Hmmmm.

Sounds like your solution would be the better thing to do.  Richard 
is looking around for a good reduction box as we speak so that he can 
just lose his current one.

- Mike White 

[Mail: mike.white@law.utah.edu   -   mwhite@eng.utah.edu]
Visit my '57 23-Window VW BUS at: [http://cloud8.law.utah.edu/]