Date:         Sun, 19 May 1996 08:57:52 -0700
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Mark McCulley <raven@halcyon.com>
Subject:      87 syncro: bushings for front drive mount

On my syncro there is about 1/8" of play in the big donut shaped bushings 
that are part of the front drive mounting system. At first I thought the 
rubber had hardened and shrunk, but upon inspection the rubber is still 
pliable and seems to be in good shape. Is this play normal? Could someone 
out there with a syncro take a look and see ifyou have the same play in 
these bushings?

-Mark McCulley

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.