Date:         Mon, 27 May 1996 22:26:03 -0400
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Grannegeer@aol.com
Subject:      86 Westy Syncro , Re: Dynamic oil pressure 

I'm still trying to track down a problem with my oil warning system. The high
and low pressure switches have been replaced along with the circuit board. At
about 3000 RPM the light flashes and the buzzer goes on. If I rev above 3000
, they stop. It was suggested to me to use the V.W. filter, it helped for a
while though it started again this weekend. Does anyone know if there is
another relay or cap. in this circuit . It gets to be pretty annoying after a
4 or 5 hour drive. I actually cut the connection on the old board so we
didn't have to listen to the buzzer on the way home from Maine.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.