Date:         Mon, 6 May 1996 22:31:51 -0400
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         DHaynes57@aol.com
Subject:      Re: Westy Fridge Modification

In a message dated 96-05-06 13:53:38 EDT, dwoolard@calpoly.edu (Don Woolard)
writes:

>
>The modification appears to involve a new one way valve and drilling out
>the pump and valve.  It also suggests a new "O" ring (available from
>hardware store).  Has anyone any knowledge about this mod.  Should I do it
>while it is out?  Is it to correct difficult lighting?  What is it to
>correct?

Make sure that check valave still functions.  if it does not, hot gases from
the flame will travel into the pump melting it.  It can be tested by
blowing/sucking into it.  The ball should seat firmly.

Dennis.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.