I'm lucky that we have a 3/4" drive ratchet, it whieghts like 15-20 pounds and scares those nuts off any old bus. With a 6 foot lenght of aluminum army tent pipe, my little self can tourque on and off to 250 lb specs. If you can't afford one of these just get a crasfman bar and try your hardest to break it weekly.
>>I got up, the socket was still sitting on the axle nut as though this >entire event >hadn't occurred. Looking around, I retrieved the breaker-bar >from under the >>bus... Yes Volks, the driver nib was still in the socket...sheared >>clean off as though someone had cut it. Determined not to let this >>little set back ruin an otherwise "good" day, I immediately found an >>optimistic angle to the situation: "Hey, not everyone has sheared off >>a 3/4" drive breaker-bar...especially without using a length of pipe." > - http://www.wolfenet.com/~hoomon The man in the 11 window Split!
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.