H. Steven Dolan wrote: >As you all no doubt know, I am a big fan of Bentley, especially for the >wiring diagrams. Well, Bentley has let me down :-( > >Does anyone out there know where the brown/blue wire from the ignition >switch plugs up? Can someone go out and have a look? It does not show up >in my Bentley at all, the first time this BOOK(tm) has left me high and >dry. > I replaced my switch with a unit from RMMW this past week. Here is the wiring configuration I used. WIRE FROM/TO DESCRIPTION Red/Black switch to starter 12V when in "START" position Black switch to fuse box and ignition coil 12V when in "ON" and "START" position Black/Yellow switch to light switch 12V only in "ON" (not "ON" & "START")? Red battery to switch 12V at all times (straight from battery) Brown/Blue(1) door buzzer connected to GND when key is in ignition Blue/gray not used (1)This wire is shown as Brown in book.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.