Date:         Sun, 9 Jun 1996 08:09:01 -0500 (CDT)
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Jon Christensen <vvwca@primenet.com>
Subject:      Re: Can I replace a Solex 28 PICT with 30 PICT 2?

Glen wrote:

> My 1961 40 hp SAE bus was converted to 12 volts by the P.O. As a result, I
> have no choke. I can't seem to locate a replacement element which will fit
> this carb. I tried tracking down an element used on the earlier ambulances
> and firetrucks which were converted to 12 volts, but no luck.  Now I 'm
> wondering if I could use a spare 30 PICT 2 I have in the cellar. This has
> the correct 12 volt element, and would seem to be a solution. But is it
> realistic, or will other problems surface?
> I do have a spacer plate which will allow the carb to fit the manifold.
> 
You could run a 36hp Solex 28 with the jets out of you 61's.  These had a 
manual choke and you'd have to add the choke cable some how.  The 30 
Solex does need an adapter.  You could make one out of a carb flange of 
an old manifold.  Just make sure you flatten it out with a file.  The air 
cleaner fits fine.  Other clearances are ok, it'll just sit about 7mm higher.

Jon Christensen        /V\      Membership Coordinator for the
~Certified VW Nut      \W/        Vintage VW Club of America 
vvwca@primenet.com             Co-Editor of the VVWCA Newsletter 
http://www.sky.net/~rmk/vvwca/      KC Kombis' NEATO Co-Rep