In a message dated 96-07-17 08:46:01 EDT, niel.blackwell@srs.gov writes: << Continues to flash while running. Checked 14 point connector at panel, tightened nuts on gauge, replaced both sensors on thermo housing and sensor in bottle. Coolant level (Sierra) full. However, that side of panel is goofy, fuel gauge wanders and clock has stopped. Related? Becoming discouraged. >> Is the container actually full while the light is on or is the coolant getting pushed out of the bottle while the ngine is running and then refilling the bottle when you turn it off? If this is the case, either the system is not bleed properly or you have problems! Dennis
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.