Depends on the installer on how the wires were routed. On one of my busses the PO snaked them around the edges of the camper floor/carpet. Check continuity for each wire front to back (label). Check for grounding to body each wire (shouldn't be grounded). I had one wire that was shorted to ground by a screw removed to route wires and re-installed through a wire. - Jeff '80 Westi > routed to the front and if they stay the same > color all the way to the front? > > Thanks > > James E. Ferree
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.