for the long piece on the drivers side you have a couple choices: 1) use an immaculate original panel 2) use an acceptable original panel 3) make a new panel with the grain running the wrong way 4) buy custom wood that is 6 foot wode with verticle grain to make a new panel 5) use a 4x8 sheet of regular wood, and splice it so the seam is hidden by the table guess what i'd do? clara
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.