In a message dated 96-08-15 22:31:35 EDT, EdBuzz@aol.com writes: >How are all you guys with the broken screw bosses holding >your instruments and warning lites on?Bubblegum? I'd suggest using some epoxy compound and then re-drilling and tapping to re-create the boss. A liquid epoxy should work well for a boss that is cracked or split, while a putty compound would work better if the boss is 1/2 gone or completely broken off. Good luck, Jim Davis 87 GL Syncro 88 GL Wolfsburg
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.