Hi, did some numbers on the Syncro low gear, 20mph freewheeling with trans in gear gives about 7900 RPM for the clutch disc. Pop goes the .... Doubtful any damage to the gearhousing, no real torque being transmitted. I think it's the low gears under load trying to spread themselves apart that wrecks the housing, the reverse idler gear is on a smallish shaft passing through a thin web section in that housing, so reverse may be the culprit. Any Syncro owners with a busted housing want to check where it broke? tx, bye, tim
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.