In a message dated 96-11-17 22:14:37 EST, meek@oanet.com (Gary Meek) writes: << I have two questions: 1. Is the receiver/dryer composed of some sort of desicant material, to absorb any moisture from the freon? 2. If the answer to #1 is yes, then can I gently toast the receiver/dryer the the oven for a few hours, at say 100 degrees C, to drive off any accumulated moisture, and then reinstall the unit in my AC freon circuit? And no, don't ask why I am recommissioning the AC, with 30 cm of the white stuff on the ground! >> Yes the dryewr uses a dessicant. The dessicant will break down and drying it in an oven only worsens the problem. If the dessicant breaks free, it will destroy the compressor, expansion valve and I have even seen this cause a hose or pipe to rupture when the system gets clogged. Spend the money. It is cheap insurance. Dennis
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.