Howdy and Help, I just replaced the head gasket on my 82 diesel. I didn't have the tools that were shown in the Bentley. I tried to keep from moving the crank, camshaft, or the pump...but things happen. I set the engine to TDC and the camshaft, IMHO, was properly set (I didn't put a valve thru a cylinder). The injector pump was a different story. The pulley didn't have a clear mark for alignment. There were several dents around the pulley and they each looked about the same. I took my best WAG and set the belt. The engine turns over and over and over... No real combustion but there is exhaust smell being produced. Is there any help for me or my diesel?? -- Steven E. Broomhead, Sr. ,============, .spew.. "I am not Slow, I am /__||___||___|| .cough.. '82 Diesel Velocity-Challenged!" | | |.sputter. Vanagon `--()-------()-' Its not the speed limit I worry about, its the minimum!!!
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.