In a message dated 96-11-24 12:04:01 EST, elks@top.monad.net writes: << Second, my front windshield washer pump is meekly pushing out fluid. I have cleaned the jets, made sure the tank is full. I replaced the pump about 7 months ago with a used one. Should I just go new? Anything else to check? TIA >> Yes. The plastic tubes can get kinked and restrict flow to a trickle. Also, despite cleaning out the nozzles, they can still be clogged inside. Buy a couple of new nozzle assemblies (you'll likely destroy the old ones removing them) & then pull your old ones out and you can examine the nozzle end of the tube for kinks. Good luck, Jim Davis 87 GL Syncro 88 GL Wolfsburg
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.