Sean, I had the same problem. I removed the switch and used contact cleaner to clean the switch. Squirt liberal amounts of cleaner into the switch, it's a tight squeeze. Repeatedly cycle the switch with it full of contact cleaner. Use compressed air or air dry the switch. When dry test with a multimeter or reinstall and test. It took two attempts to get my switch to work. It has been working for over a year now with no problems. I am using 50w bulbs in the back up lights. I can actualy see behind the van at night. Hope this helps. Colin A Moran K&M Ranch
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.