Date:         Sat, 23 Nov 1996 00:14:37 -0700
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Will Wood <wkwood@burgoyne.com>
Subject:      RE: diesel head - precombustion chamber steel caps

I have a few old rabbit heads around here, If they'll fit you could =
probably have one.  However since you mention damage, you'll probably =
have to redo the head and the bottom end.  The reason being that since =
clearances are so close in a diesel, you may have bent the rod or =
severly damaged the piston.  I suggest you contact MOFCO (in Wisconson) =
they have rebuilt heads for about $250 for rabbits.

Regards.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.