Date:         Thu, 21 Nov 1996 23:00:44 -0700
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Will Wood <wkwood@burgoyne.com>
Subject:      RE: diesel fuel line

If it's anything like my diesel rabbits, then the line you're talking =
about with the
two banjo fittings is on the pull side of the pump, not the pressure =
side.  Maybe I'm confused.  But I've had the little plastic line crack =
in the way you mention before.  I just replace it with 1/4 inch fuel =
line hose and clamp the ends.  You could also have a piece of AN4 or AN6 =
line made up at a local shop with the banjo fittings (We have a local =
place called EVCO which can do this)

Regards

----------

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.