Date:         Mon, 25 Nov 1996 11:24:53 +1000
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         dwoolard@calpoly.edu (Don Woolard)
Subject:      Diff Lock - Syncro

Paul,  I have been having problems with the diff lock and the indicator
light switch.  It seems important to know a few things, first the indicator
light is activated by the lock itself - not the switch.  The switch
requests the lock to be engaged but the actual engaging happens when it is
able too - this engaging causes the indicator light to come on.

I do not know what you mean when you say "pulling the switch in"?  Mine was
back to front because the vacuum lines had been swapped around!

I think you should not drive on a hard surface with the lock engaged.

Hope this is some help.
Don

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.