That JB Weld is some tough stuff. I noted where list members used it in repairing pitted heads. I had a problem with a JD diesel tractor - the splines in the coupling for the front PTO was stripped out. It couples the PTO to an oil pump for hydrolics. I took off the coupling and cleaned it out real good with solvent. Then I mixed some JBW. and applied about 1/16" coat on the inside of the coupling and left harden. I applied another batch - a little thicker this time and left harden. Next day I filled new splines with a triangular file in the JBW. Reattached the coupling - and it works great. Got the JBW at Wal M___. Gary 80Westy; 88GL
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.