Hey all, Just got my heater yesterday afternoon and haven't started installing it yet, but have a few questions: 1. I think I know which is the combustion inlet and exhaust, but which is which re. the fresh air inlet and outlets? I guess I could just hook it up and see which one blows out air, but I figure someone has already done that and could tell me. 2. When running the silver hose from the combustion inlet/outlet to the side of the bus, do you use the silver hose on both, or just the exhaust (not hooking anything to the inlet)? And what about the little vent cover hat thing? Does that go on the end of the exhaust on the side of the bus? Or on the intake side? The instructions aren't too clear on the details, and where all the pieces go. 3. What about that black control box with the two sided tape? Can I just stick it to the furnace itself, or would that be too hot? Thanks... Pat Walsh, '71 Westy, walshp@camry.nawc-ad-indy.navy.mil
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.