Anyone know what the exhaust pipe is called that goes from the exhaust manifold to the catalytic convertor on the Westy air-cooled Federal model Westy? On the door is the date 8/82. Is this the early or late model 83? The pipe comes from the two manifolds and bends 180 degrees to meet the connector for the catylitic convertor. Each of the manifold connectors are triangular shaped having three holes for the bolts that connect it to the manifold. Likewise, the connection to the c/c has a simillar connection. There is a bolt sticking out of the bend like a "clean-out plug". And on the right side of the pipe is a welded on bracket for the bolt that holds the mufffler up near the tail pipe. The Orlando dealer does not list the part no. as it is no longer available. I sure would appreciate getting the correct one as most parts houses seem to be far from here. Thanks. Bob. If you represent a parts house, please fax me at 407-896-1243. Thanks again.
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.