Use a large screwdriver, carefully turn it by inserting the blade between the teeth of the flywheel and leveradging against the motor mount stud at the bottom of the case. ---------- > From: Sean Bartnik <sbart7kb@www.mwc.edu> > To: Multiple recipients of list <vanagon@lenti.med.umn.edu> > Subject: how to turn over engine? > Date: Sunday, December 01, 1996 8:18 PM > > Hey all, > Just curious: > > How do those with air-cooled Vanagons turn the motor over manually? > I've seen in Bentley the picture of the special tool that engages the > slot in the fan hub, blah blah but I don't have that tool. I was trying > to do it over break and I couldn't get it. I tried getting a socket on > one of the fan hub bolts, but I couldn't get this thing to turn over at > all, tho that worked with the '78. Couldn't get enough grip on the fan > belt to turn the engine either. So, for those doing points, etc, how do > you turn the engine over? > > Sean
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.