If that cold air return line is for some sort of internal cooling you could have problems. I'll bet they put that there for a reason. Just a thought. Rob
At 01:58 PM 12/9/96 -0600, you wrote: >Did some experimentation this weekend. I think you can >avoid cutting a second hole in the face of your rear seat kickpanel by >not installing the cold air return >inlet. > >I used some tape to close off my inlet and noticed >no difference in the output of the furnace, nor any difference in the >sound the furnace was making. > >My theory is that cold air backflows through the >rear heater and squirrelcage fan; plenty of air >is available to be heated by the furnace without supplying a new inlet >vent. > >Later, > >Tom F. > >
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.