Jim, The best method, I would think, would be to tow the Sycnro using a Flatbed, where none of the wheels are moving. But in a pinch, if I had to use a tow bar, with all wheels on the ground, would it be O.K to just put it in neutral, with the VC still connecting the front and rear wheels? If I were to prepare for a trip to pull a Syncro using a tow bar (say 1000 miles), would it be worthwhile to disconnect the driveshaft or other normally connected drive parts, like universal joints? What would be the best method to disconnect the driveshafts? Thanks, Charles
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.